Human Bone marrow proteoglycan / PRG2 ELISA Kit
제품 코드를 사용하여 Assay Genie 메인 사이트를 통해 주문합니다.
주문- SKU:
- HUFI00935
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P13727
- Sensitivity:
- 0.188ng/ml
- Range:
- 0.313-20ng/ml
- ELISA Type:
- Sandwich ELISA, Double Antibody
- Synonyms:
- PRG2, Bone marrow proteoglycan, BMPG, Proteoglycan 2
- Reactivity:
- Human
Frequently bought together:
Description
Human Bone marrow proteoglycan / PRG2 ELISA Kit
This gene encodes the main component of the eosinophil granule's crystalline core. The proform of this protein is also found in high amounts in the placenta and pregnancy serum, where it is combined with other proteins including PAPPA, ANGOTENIN (AGT), and C3DG. It has been associated with anti-parasitic defense responses as a cytotoxin and helminthotoxin, as well as immune hypersensitivity reactions. The protein, which has been deciphered, contains a peptide that shows strong antibacterial activity against Gram-positive bacteria, Gram-negative bacteria, and mold. It has been linked to epithelial cell damage, exfoliation, and bronchospasm in allergy. Transcript variants containing alternate spliced isoforms have been discovered for this gene. Hypereosinophilic Syndrome and Dermatographia are two diseases connected with PRG2. The Integrin Pathway and ERK Signaling are two pathways that it is involved in.
| Product Name: | Human Bone marrow proteoglycan / PRG2 ELISA Kit |
| Product Code: | HUFI00935 |
| Size: | 96 Assays |
| Alias: | PRG2, Bone marrow proteoglycan, BMPG, Proteoglycan 2 |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human PRG2 concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 0.188ng/ml |
| Range: | 0.313-20ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human PRG2 and the recovery rates were calculated by comparing the measured value to the expected amount of Human PRG2 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human PRG2 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | P13727 |
| UniProt Protein Function: | PRG2: Cytotoxin and helminthotoxin. Also induces non-cytolytic histamine release from human basophils. Involved in antiparasitic defense mechanisms and immune hypersensitivity reactions. The proform acts as a proteinase inhibitor, reducing the activity of PAPPA. |
| UniProt Protein Details: | Protein type:Vesicle; Secreted; Secreted, signal peptide Chromosomal Location of Human Ortholog: 11q12 Cellular Component: transport vesicle; extracellular region Molecular Function:heparin binding; carbohydrate binding Biological Process: positive regulation of interleukin-4 production; negative regulation of interleukin-10 production; defense response to bacterium; immune response; defense response to nematode |
| NCBI Summary: | The protein encoded by this gene is the predominant constituent of the crystalline core of the eosinophil granule. High levels of the proform of this protein are also present in placenta and pregnancy serum, where it exists as a complex with several other proteins including pregnancy-associated plasma protein A (PAPPA), angiotensinogen (AGT), and C3dg. This protein may be involved in antiparasitic defense mechanisms as a cytotoxin and helminthotoxin, and in immune hypersensitivity reactions. The encoded protein contains a peptide that displays potent antimicrobial activity against Gram-positive bacteria, Gram-negative bacteria, and fungi. It is directly implicated in epithelial cell damage, exfoliation, and bronchospasm in allergic diseases. Alternatively spliced transcript variants encoding different isoforms have been found for this gene. [provided by RefSeq, Nov 2014] |
| UniProt Code: | P13727 |
| NCBI GenInfo Identifier: | 281185479 |
| NCBI Gene ID: | 5553 |
| NCBI Accession: | P13727.2 |
| UniProt Secondary Accession: | P13727,P81448, Q14227, Q6ICT2, A6XMW0, B2R5I1, |
| UniProt Related Accession: | P13727 |
| Molecular Weight: | 25kDa |
| NCBI Full Name: | Bone marrow proteoglycan |
| NCBI Synonym Full Names: | proteoglycan 2, bone marrow (natural killer cell activator, eosinophil granule major basic protein) |
| NCBI Official Symbol: | PRG2 |
| NCBI Official Synonym Symbols: | MBP; BMPG; MBP1 |
| NCBI Protein Information: | bone marrow proteoglycan; bone-marrow proteoglycan; proteoglycan 2 preproprotein; natural killer cell activator; eosinophil major basic protein; eosinophil granule major basic protein |
| UniProt Protein Name: | Bone marrow proteoglycan |
| UniProt Synonym Protein Names: | Proteoglycan 2Eosinophil granule major basic protein; EMBP; MBPAlternative name(s):Pregnancy-associated major basic protein |
| Protein Family: | Myelin basic protein |
| UniProt Gene Name: | PRG2 |
| UniProt Entry Name: | PRG2_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human PRG4 (Proteoglycan 4) ELISA Kit
€0.00
system_update_alt데이터시트system_update_alt안전 데이터시트Hum
HUFI00842
Human PRG3 (Proteoglycan 3) ELISA KIT (HUFI08100)
€0.00
Overview 개요Product Name:Human PRG3 (Proteoglycan 3) ELISA KIT Product Code:HUFI08100Size:96 AssaysAlias:PRG3 ELISA Kit
HUFI08100
Human BST2 (Bone marrow stromal antigen 2) ELISA Kit (HUFI04601)
€0.00
Overview 개요Product Name:Human BST2 (Bone marrow stromal antigen 2) ELISA Kit Product Code:HUFI04601Size:96 AssaysAlias:BST2 ELISA Kit
HUFI04601