Human beta Catenin / CTNNB1 ELISA Kit
제품 코드를 사용하여 Assay Genie 메인 사이트를 통해 주문합니다.
주문- SKU:
- HUFI00414
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P35222
- Sensitivity:
- 0.094ng/ml
- Range:
- 0.156-10ng/ml
- ELISA Type:
- Sandwich ELISA, Double Antibody
- Synonyms:
- CTNNBeta1, CTNNB1, CTNNB, MRD19, armadillo, beta 1, 88kD, beta-catenin, catenin, cadherin-associated protein, beta 1, 88kDa, catenin beta-1
- Reactivity:
- Human
Description
| Product Name: | Human beta Catenin / CTNNB1 ELISA Kit |
| Product Code: | HUFI00414 |
| Size: | 96 Assays |
| Alias: | CTNNbeta1, CTNNB1, CTNNB, MRD19, armadillo, beta 1, 88kD, beta-catenin, catenin, cadherin-associated protein, beta 1, 88kDa, catenin beta-1 |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human CTNNbeta1 concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 0.094ng/ml |
| Range: | 0.156-10ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human CTNNbeta1 and the recovery rates were calculated by comparing the measured value to the expected amount of Human CTNNbeta1 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human CTNNbeta1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | P35222 |
| UniProt Protein Function: | CTNNB1: a regulator of cell adhesion and a key downstream effector in the Wnt signaling pathway. Implicated early embryonic development and tumorigenesis. Phosphorylated and destabilized by CK1 and GSK-3beta. Stabilized cytoplasmic beta-catenin is a hallmark of a variety of cancers. Stabilized beta-catenin translocates to the nucleus, where it acts as a transcriptional activator of T-cell factor (TCF)-regulated genes. Interacts with the PDZ domain of TAX1BP3, inhibiting its transcriptional activity. Two alternatively spliced human isoforms have been described. |
| UniProt Protein Details: | Protein type:Transcription factor; Motility/polarity/chemotaxis; Cell adhesion; Oncoprotein; Nuclear receptor co-regulator; Actin-binding Chromosomal Location of Human Ortholog: 3p21 Cellular Component: centrosome; basolateral plasma membrane; intercellular junction; fascia adherens; cytosol; beta-catenin destruction complex; transcription factor complex; cell-cell adherens junction; membrane; lamellipodium; perinuclear region of cytoplasm; cytoplasm; synapse; dendritic shaft; lateral plasma membrane; spindle pole; focal adhesion; tight junction; catenin complex; cell cortex; Z disc; nucleoplasm; adherens junction; microvillus membrane; apical part of cell; plasma membrane; nucleus; cell junction Molecular Function:protein C-terminus binding; transcription coactivator activity; transcription factor binding; protein phosphatase binding; ionotropic glutamate receptor binding; protein binding; signal transducer activity; enzyme binding; androgen receptor binding; cadherin binding; double-stranded DNA binding; protein complex binding; estrogen receptor binding; nitric-oxide synthase binding; SMAD binding; transcription factor activity; kinase binding; alpha-catenin binding; nuclear hormone receptor binding Biological Process: regulation of myelination; regulation of centriole-centriole cohesion; positive regulation of apoptosis; protein heterooligomerization; positive regulation of transcription, DNA-dependent; regulation of fibroblast proliferation; cell maturation; negative regulation of chondrocyte differentiation; T cell differentiation in the thymus; positive regulation of fibroblast growth factor receptor signaling pathway; osteoclast differentiation; Wnt receptor signaling pathway through beta-catenin; cell-cell adhesion; positive regulation of endothelial cell differentiation; regulation of cell fate specification; embryonic foregut morphogenesis; positive regulation of mesenchymal cell proliferation; male genitalia development; ectoderm development; synapse organization and biogenesis; cell adhesion; bone resorption; response to drug; positive regulation of neuroblast proliferation; positive regulation of I-kappaB kinase/NF-kappaB cascade; regulation of smooth muscle cell proliferation; transcription, DNA-dependent; hair cell differentiation; negative regulation of protein sumoylation; patterning of blood vessels; genitalia morphogenesis; muscle cell differentiation; midgut development; smooth muscle cell differentiation; positive regulation of transcription from RNA polymerase II promoter; embryonic digit morphogenesis; negative regulation of transcription, DNA-dependent; oocyte development; embryonic forelimb morphogenesis; negative regulation of osteoclast differentiation; glial cell fate determination; endodermal cell fate commitment; apoptosis; cell-matrix adhesion; neuron migration; dorsal/ventral axis specification; cell fate specification; positive regulation of histone H3-K4 methylation; negative regulation of transcription from RNA polymerase II promoter; embryonic hindlimb morphogenesis; response to estradiol stimulus; negative regulation of cell proliferation; central nervous system vasculogenesis; positive regulation of MAPKKK cascade; pancreas development; positive regulation of interferon type I production; fallopian tube development; proximal/distal pattern formation; layer formation in the cerebral cortex; negative regulation of mitotic cell cycle, embryonic; cell structure disassembly during apoptosis; Wnt receptor signaling pathway; hair follicle morphogenesis; thymus development; in utero embryonic development; regulation of T cell proliferation; neural plate development; stem cell maintenance; embryonic axis specification; synaptic vesicle transport; gastrulation with mouth forming second; liver development; regulation of angiogenesis; odontogenesis of dentine-containing teeth; myoblast differentiation; negative regulation of oligodendrocyte differentiation; Schwann cell proliferation; positive regulation of osteoblast differentiation; response to cadmium ion; ureteric bud branching; response to cytokine stimulus; androgen receptor signaling pathway; epithelial to mesenchymal transition; positive regulation of muscle cell differentiation; embryonic heart tube development; innate immune response; lens morphogenesis in camera-type eye; anterior/posterior axis specification Disease: Pilomatrixoma; Mental Retardation, Autosomal Dominant 19; Ovarian Cancer; Colorectal Cancer; Hepatocellular Carcinoma |
| NCBI Summary: | The protein encoded by this gene is part of a complex of proteins that constitute adherens junctions (AJs). AJs are necessary for the creation and maintenance of epithelial cell layers by regulating cell growth and adhesion between cells. The encoded protein also anchors the actin cytoskeleton and may be responsible for transmitting the contact inhibition signal that causes cells to stop dividing once the epithelial sheet is complete. Finally, this protein binds to the product of the APC gene, which is mutated in adenomatous polyposis of the colon. Mutations in this gene are a cause of colorectal cancer (CRC), pilomatrixoma (PTR), medulloblastoma (MDB), and ovarian cancer. Three transcript variants encoding the same protein have been found for this gene.[provided by RefSeq, Oct 2009] |
| UniProt Code: | P35222 |
| NCBI GenInfo Identifier: | 461854 |
| NCBI Gene ID: | 1499 |
| NCBI Accession: | P35222.1 |
| UniProt Secondary Accession: | P35222,Q8NEW9, Q8NI94, Q9H391, A8K1L7, |
| UniProt Related Accession: | P35222 |
| Molecular Weight: | |
| NCBI Full Name: | Catenin beta-1 |
| NCBI Synonym Full Names: | catenin (cadherin-associated protein), beta 1, 88kDa |
| NCBI Official Symbol: | CTNNB1Â Â |
| NCBI Official Synonym Symbols: | CTNNB; MRD19; armadillo  |
| NCBI Protein Information: | catenin beta-1 |
| UniProt Protein Name: | Catenin beta-1 |
| UniProt Synonym Protein Names: | Beta-catenin |
| Protein Family: | Catenin |
| UniProt Gene Name: | CTNNB1Â Â |
| UniProt Entry Name: | CTNB1_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Mouse Beta Catenin / CTNNb1 ELISA Kit
Human CTNNBIP1 (Beta-catenin-interacting protein 1) ELISA KIT (HUFI08227)
