Human/Monkey TEAD3 (Transcriptional enhancer factor TEF-5) ELISA Kit (AEFI01100)

(No reviews yet) Write a Review
SKU:
AEFI01100
Product Type:
ELISA Kit
Size:
96 Assays
Sensitivity:
0.094ng/ml
Range:
0.156-10ng/ml
Frequently bought together:

Description

Product Name: Human/Monkey TEAD3 (Transcriptional enhancer factor TEF-5) ELISA Kit
Alias: Transcriptional enhancer factor TEF-5 ELISA Kit, DTEF-1 ELISA Kit, TEA domain family member 3 (TEAD-3) ELISA Kit, TEAD3 ELISA Kit, TEAD5 ELISA Kit, TEF5 ELISA Kit
SKU: AEFI01100
Size: 96T
Species: Human/Monkey
UniProt No.: Q99594 A0A0D9RC80
Sample Type: Serum, Plasma, Cell Culture Supernatant, cell or tissue lysate, Other liquid samples
Detection Method: Sandwich ELISA, Double Antibody
Detection Wavelength: OD450
Reaction Duration: 4 hours
Range: 0.156-10ng/ml
Sensitivity: 0.094ng/ml
Storage: 2-8°C(Sealed), Don't cryopreserve.
Specificity: Specifically binds with TEAD3, no obvious cross reaction with other analogues.
Component Size (96T) Storage
ELISA Microplate (Dismountable) 8×12 Put the rest strips into a sealed foil bag with the desiccant. Stored for 1 month at 2-8°C; Stored for 6 months at -20°C
Lyophilized Standard 2 vials Put the rest standards into a desiccant bag. Stored for 1 month at 2-8°C; Stored for 6 months at -20°C
Biotin-labeled Antibody (Concentrated, 100X) 120 ul 2-8°C (Avoid Direct Light)
HRP-Streptavidin Conjugate (SABC, 100X) 120 ul
TMB Substrate 10 ml
Sample Dilution Buffer 20 ml 2-8°C
Antibody Dilution Buffer 10 ml
SABC Dilution Buffer 10 ml
Stop Solution 10 ml
Wash Buffer (Concentrated, 25X) 30 ml
Plate Sealer 5 pieces
Product Description 1 copy

Other materials and equipment required:

  • Microplate reader (wavelength: 450nm)
  • 37°C incubator (CO2 incubator for cell culture is not recommended.)
  • Automated plate washer or multi-channel pipette/5ml pipettor (for manual washing purpose)
  • Precision single (0.5-10μL, 5-50μL, 20-200μL, 200-1000μL) and multi-channel pipette with disposable tips(Calibration is required before use.)
  • Sterile tubes and Eppendorf tubes with disposable tips
  • Absorbent paper and loading slot
  • Deionized or distilled water
Recovery: Add a certain amount of TEAD3 into the sample. Calculate the recovery by comparing the measured value with the expected amount of TEAD3 in the sample.
Sample Type Recovery Range(%) Average(%)
serum(n=10) 88-105 98
EDTA plasma(n=10) 87-104 92
Heparin plasma(n=10) 86-101 94
Linearity: Dilute the sample with a certain amount of TEAD3 at 1:2, 1:4 and 1:8 to get the recovery range.
Sample Type 1:2 1:4 1:8
serum(n=10) 87-104% 86-103% 91-103%
EDTA plasma(n=10) 83-98% 82-95% 84-101%
Heparin plasma(n=10) 88-100% 82-98% 85-87%
Stability: Perform the stability test for the sealed kit at 37°C and 2-8°C and get relevant data.
ELISA kit(n=5) 37°C for 1 month 2-8°C for 6 months
Average(%) 80 95-100
Precision(%): Intra-assay Precision: samples with low, medium and high concentration are tested 20 times on the same plate.
Inter-assay Precision: samples with low, medium and high concentration are tested 20 times on three different plates.
Sample 1 2 3 1 2 3
n 20 20 20 20 20 20
Mean (ng/ml) 0.33 1.24 5.09 0.32 1.27 5.09
Standard deviation 0.02 0.07 0.29 0.02 0.07 0.29
CV(%) 6.32 5.92 5.72 6.43 5.82 5.78
Step 1: Add 100ul standard or sample into each well, seal the plate and statically incubate for 90 minutes at 37°C.
Washing: Wash the plate twice without immersing.
Step 2: Add 100ul biotin-antibody working solution, seal the plate and statically incubate for 60 minutes at 37°C.
Washing: Wash the plate three times and immerse for 1min each time.
Step 3: Add 100ul HRP-Streptavidin Conjugate (SABC) working solution, seal the plate and statically incubate for 30 minutes at 37°C.
Washing: Wash the plate five times and immerse for 1min each time.
Step 4: Add 90ul TMB substrate solution, seal the plate and statically incubate for 10-20 minutes at 37°C. (Accurate TMB visualization control is required.)
Step 5: Add 50ul stop solution. Read at 450nm immediately and calculate.

0 Reviews

View AllClose

Related Products